MPI-5200 pages

Index: WMGBMPI520

Possible measurements
· Short-circuit loop measurement:
- impedance measurement with 23A current (44A phase-to-phase) short-circuit resistor R=10Ω,
- measurement range: 95...440V, frequency 45...65Hz,
· Short-circuit loop measurement with resolution
0,01Ω, in distribution network without tiggering RCD
(IΔn≥30mA):
- automatic calculation of short-circuit, detection of phase voltage
and phase-to-phase voltage,
- additional UNI-Schuko plug for automatic measurement,
AGT adapter for 3 phase network measurement.

MULTIFUNCTION ELECTRICAL
INSTALLATIONS METER

MPI-520

· Testing of general and selective RCD with the rated
differential current of 10,30,100,300,500 and 1000mA.
(Type AC, A and B).
· Measurement of insulation resistance:
- with test voltage 250V, 500V, 1000V,
- measurement range up to 3GΩ,
- UNI-Schuko plug for insulation measurement,
- automatic discharging after measurement,
- automatic measurement of all resistences in 3,4,5-wire cables
using optional adapter AUTO-ISO,
- acoustic signals in 5sec intervals for insulation resistance
characteristic,
- safety measurement - protection against overvoltage.
· Measurement of earthing resistance.
· Bi-directional testing of PE wire continuity using
200mA current.
- Autocalibration of test leads.
· Phase sequence testing.
· Memory is divided into 10 memory banks each of them containing
99 memory cells.
· Battery charge indicator.
· AUTO-OFF function.
· USB interface.

Standard accesories of the meter MPI-520: Optional accesories of the meter MPI-520:

The MPI-520 multifunction meter is dedicated
to perform diagnosis of electrical installation
according to IEC 61557 standards. Digital
meter MPI-520 is designed to measure
impedance of a short cicuit loop also without
triggering RCD, parameters of RCD, insulation
resistance, earthing resistance, continuity and
also for phase sequence testing. Furthermore
it is used for measurement of AC voltage and
current, frequency and power.

- probe with START button with
WAADAWS03
UNI-SCHUKO (WS-03)
- test lead with banana plug; 1,2m; yellow WAPRZ1X2YEBB
WAPRZ1X2BUBB
- test lead with banana plug; 1,2m; blue
WAPRZ1X2REBB
- test lead with banana plug; 1,2m; red
- test lead on a reel with banana plugs;
WAPRZ030REBBSZ
30m; red
- test lead on a reel with banana plugs;
WAPRZ015BUBBSZ
15m; blue
WAPRZUSB
- USB transmission cable
- pin probe with banana connector; yellow WASONYEOGB1
WASONREOGB1
- pin probe with banana connector; red
WASONBUOGB1
- pin probe with banana connector; blue
WAKROYE20K02
- crocodile clip K02; yellow
WAKRORE20K02
- crocodile clip K02; red
WASONG30
- earth contact test probe (rod); 0,3m
WAFUTL1
- carrying case L1
WAPOZSZEKPL
- hanging straps
WAPOJ1
- battery case LR14 (size C)
- batteries
- calibration certificate issued
by calibration laboratory

- test lead with banana plug 5m; red
WAPRZ005REBB
- test lead with banana plug 10m; red
WAPRZ010REBB
- test lead with banana plug 20m; red
WAPRZ020REBB
- cable for battery charger
WAPRZLAD230
- lead for battery loading from the socket
of car lighter (12V)
WAPRZLAD12SAM
- AC line splitter (AC-16)
WAADAAC16
- triple phase socket adapter AGT-16P
WAADAAGT16P
- triple phase socket adapter AGT-32P
WAADAAGT32P
- triple phase socket adapter AGT-63P
WAADAAGT63P
- adapter AUTO-ISO-1000C
WAADAAISO10C
- RCD breaker testing adapter TWR-1
universal pin
WAADATWR1J
- probe with UNI-SCHUKO (WS-04)
WAADAWS04
- earth contact test probe (rod); 0,8m
WASONG80
- carrying case L3
WAFUTL3
- round connector current
clamps C3 (Ø=52mm)
WACEGC3OKR
- Ni-MH battery package 4,8V 4,2Ah
WAAKU07
- crocodile clip K02; blue
WAKROBU20K02
- cramp
WAZACIMA1
- test wire reel
WAPOZSZP1
- power supply adaptor Z7
WAZASZ7
- software for creation of documentation from
electrical measurements “SONEL PE5"
WAPROSONPE5
- software for creation drawings and diagrams
"SONEL Schematic” + „SONEL PE5”
WAPROSCHEM