MPI-5050 pages

Index: WMPLMPI505

MULTI-FUNCTION ELECTRICAL
INSTALLATIONS METER

MPI-505

! Measurement of short-circuit loop parameters:
- in L-PE, L-N, L-L circuits as well as in L-PE (RCD) circuits - without tripping RCD breakers of current ≥ 30 mA.
- impedance measurement of short-circuit loops in power networks of nominal voltages: 115/200 V, 220/380 V, 230/400 V, 240/415
V and frequencies in the range of 45…65 Hz..
! Testing of AC and A types residual current circuit breakers:
- testing of regular and selective residual current circuit breakers of nominal differential currents: 10 mA, 30 mA, 100 mA, 300 mA,
500 mA, 1000 mA,
- IA trip current measurement,
- tA trip time measurement for 0.5IΔn, IΔn, 2IΔn, 5IΔn,
- measurement of earth continuity and touch voltage without tripping RCDs,
- functionality of automatic measurement of residual current circuit breaker parameters.
! Measurement of insulation resistance at voltages: 100 V, 250 V, 500 V and 1000 V.

Sonel S.A.
ul. Wokulskiego 11
58-100 Świdnica
tel. +48 74 85 83 878
fax +48 74 85 83 808

dh@sonel.pl
www.sonel.pl

! Low-voltage measurement of resistance, protective connections and equipotential bonding:
- measurement of continuity of protective connections with current ±200 mA,
- automatic calibration of test leads - capability of using any test leads,
- measurement of resistance with low current and acoustic signaling.
! Quick verification of correctness of the PE wire connection with a touch probe.
! Measurement of AC voltage.
! Indication of phase sequence.
! Memory of 990 measurements, data transfer to a PC over the USB interface.
! MPI-505 is equipment to perform complete test and verify on electrical installations according to the most common safety
standards (IEC 61557, VDE 0100, BS7671).