Hydraverter - HV180 pages

Hydraverter
Features and Benefits
The HV18 Hydraverter is an efficient,
clean, and air-oil cooled
portable hydraulic system for operating
hydraulic tools from another
hydraulic source such as a
backhoe, excavator, or loader.
The HV18 obtains its power from
the hydraulics of any backhoe,
excavator, skidsteer loader, or
any other hydraulic equipment capable
of supplying up to 35 gpm at
2000 to 3000 psi with
backpressures up to 400 psi.
SPECIFICATIONS
!
"#
n$#!$#
%
n$#$t
The HV18 contains; its own oil
reservoir and hydraulic filter; its
own on-off control for the tool circuit;
its own high capacity fluid
cooling; and quick disconnect,
HTMA, flush-face couplers for
tool circuit connections.
The HV18 will power all Stanley
hydraulic tools requiring an oil
flow of 8 gpm and pressures up to
2200 psi.
The HV18 is available in two models.
The HV18301 for input oil
ITEM U.S.A. METRIC
CAPACITY Hyd Tools Requiring 8 gpm (30 lpm) and up to 2000 psi (138 bar)
PERFORMANCE 7 - 9 gpm 26 - 34 lpm
FLOW RANGE INPUT
HV18300 16 - 35 gpm 60 - 132 lpm
HV18301 13 - 25 gpm 49 - 95 lpm
PRESSURE INPUT 2000 - 3000 psi 138 - 206 bar
WEIGHT (wet) 100 lbs 45 kg
LENGTH 21 in. 53 cm
WIDTH 19 in. 48 cm
HEIGHT 20 in. 51 cm
CONNECTION 3/8 in. Flush Face Quick Disconnect Coupler
HOSE WHIPS No
PORTS -12 SAE, 1-1/16-12 Straight Thread
OIL RESERVOIR CAPACITY 2.7 gallons 10 liters
FILTRATION 25 gpm, 20 micron, in tank
TOOL CONTROL Directional On-Off Valve
COOLING Air-Oil Heat Exchanger with High Volume Blower Wheel
HV18
flows from 13 to 25 gpm and the
HV18300 for input oil flows of 16
to 35 gpm.
The HV18 is the perfect solution
for operating hydraulic tools using
existing hydraulic equipment. The
HV18 maintains a low fluid temperature
in the tool, provides independent
tool circuit control and relief
protection, and simplicity in attaching
to a variety of hydraulic
equipment.